HiTEC specifications

Information


Unique identifier OMICS_01105
Name HiTEC
Alternative name High Throughput Error Correction
Software type Package/Module
Interface Command line interface
Restrictions to use None
Operating system Unix/Linux
Computer skills Advanced
Stability Stable
Maintained Yes

Versioning


Add your version

Publication for High Throughput Error Correction

HiTEC in publications

 (75)
PMCID: 5941677
PMID: 29743073
DOI: 10.1186/s12934-018-0917-8

[…] ramos device enabled the quasi-continuous monitoring of the respiration activity of cultivations. commercial versions of the ramos device can be obtained from kühner ag (biersfelden/switzerland) or hitec zang gmbh (herzogenrath, germany). duplicate cultivations in offline batch and fed-batch shake flasks were conducted parallelly when offline analysis was required., for strain maintenance, cryo […]

PMCID: 5906608
PMID: 29670188
DOI: 10.1038/s41598-018-24560-3

[…] haptic tactors attached to the subject (design courtesy of the university of alberta). each tactor used a rack and pinion gear system to convert rotational motion generated by a servo motor (hitec, hs-35hd) to linear motion that was applied to the subject’s skin via an 8 mm diameter domed head. measured force from the sensorized prosthetic hand (custom retrofitting of ottobock myohand […]

PMCID: 5876727
PMID: 29562633
DOI: 10.3390/s18030900

[…] were monitored gravimetrically using balances (mettler toledo, giessen, germany). all additional perfusion equipment was controlled by an in-house process control system based on labvision v2.10 (hitec zang, herzogenrath, germany). perfusion was carried out as a multistep process involving an initial batch culture step followed by a perfusion step without bleeding to reach the high target […]

PMCID: 5874891
PMID: 29547557
DOI: 10.3390/bioengineering5010025

[…] antibody in a serum-free medium. the cultivation conditions were 36.8 °c, 5.0% carbon dioxide, 433 rpm, ph 7.1 and 60.0% dissolved oxygen (po2). the in-situ turbidity probe (transmission, 880 nm, hitec zang gmbh, herzogenrath, germany) was connected to a labmanager® (hitec zang gmbh). raman spectroscopy was performed using an ex-situ raman probe (diode laser, 785 nm, ocean optics b.v, […]

PMCID: 5766612
PMID: 29330523
DOI: 10.1038/s41598-017-19083-2

[…] corp., waltham, ma, usa) and fabricated with a dimension elite 3d printer (stratasys, eden prairie, mn, usa) in acrylonitrile butadiene styrene (abs) material.figure 2, two servo motors (hs-755hb, hitec rcd, poway, ca, usa), located at the top of the platform, were connected to a rack-and-pinions gear (robotzone, winfield, ks, usa) and used to actuate the platform along the x-axis, as shown […]


To access a full list of publications, you will need to upgrade to our premium service.

HiTEC institution(s)
Department of Computer Science, University of Western Ontario, London, ON, USA; Department of Mathematics, Ryerson University, Toronto, ON, Canada
HiTEC funding source(s)
Supported by Natural Sciences and Engineering Research Council of Canada (NSERC).

HiTEC reviews

star_border star_border star_border star_border star_border
star star star star star

Be the first to review HiTEC